Class A -3- Vehicle Technology - Level 3 | Führerschein Österreich

Class A -3- Vehicle Technology - Level 3

3 of 4 Levels

1 / 15

Category: Class A -3- Vehicle Technology - Level 3

You are checking the tire pressure on your motorcycle. What do you pay attention to?

That the tires are not loaded

It must correspond to the specification in the operating manual

The tires must be cold

The tires must be warmed up from riding

2 / 15

Category: Class A -3- Vehicle Technology - Level 3

On your motorcycle, this indicator light comes on. How do you behave?

I stop immediately

I pull the clutch lever and press the kill switch

I continue to the next gas station

After stopping, I immediately turn off the engine

3 / 15

Category: Class A -3- Vehicle Technology - Level 3

A left turn signal on your motorcycle has failed. How do you behave for a planned turning maneuver?

I may only turn right until I am in the desired street

I give a hand signal with my right arm in good time

I stretch my left foot out to the side of the motorcycle

I give a hand signal with my left arm in good time

4 / 15

Category: Class A -3- Vehicle Technology - Level 3

What dangers exist when riding with too low tire pressure?

The steering behavior of the motorcycle is severely impaired

The reaction distance becomes longer

The motorcycle tends to weave

The braking distance becomes longer

5 / 15

Category: Class A -3- Vehicle Technology - Level 3

On your motorcycle, this indicator light comes on. What causes can this have?

The radiator fan has failed

The radiator has become leaky

The proportion of antifreeze is too low

The coolant level has dropped below minimum

6 / 15

Category: Class A -3- Vehicle Technology - Level 3

How can you tell that the brake pads of a mechanical drum brake are worn down to the limit?

When no free play is noticeable on the foot brake lever

When the brake pads get hot

By the marking arrows on the brake anchor plate and the brake linkage

By the position of the foot brake lever

7 / 15

Category: Class A -3- Vehicle Technology - Level 3

On your motorcycle, this indicator light comes on. What does this mean for you?

I have switched on the fog light

I have switched on the high beam

I have only switched on the low beam

I have switched on the daytime running lights

8 / 15

Category: Class A -3- Vehicle Technology - Level 3

You are checking the tire pressure on your motorcycle. What do you pay attention to?

It must correspond to the specification in the operating manual

That the tires are cold

The tires must be warmed up from riding

That the tires are not loaded

9 / 15

Category: Class A -3- Vehicle Technology - Level 3

On your motorcycle, this indicator light is blinking much faster or slower than usual. What do you conclude from this?

One turn signal has failed

The brake light has failed

The hazard warning system is switched on

All turn signals have failed

10 / 15

Category: Class A -3- Vehicle Technology - Level 3

What dangers exist when riding with too high tire pressure in the front tire?

The braking distance becomes longer on uneven roads

The tire bounces, the cushioning effect of the tire becomes worse

The handlebars can flutter

The tire could burst when riding over a bump

11 / 15

Category: Class A -3- Vehicle Technology - Level 3

On your motorcycle, this indicator light comes on. How do you behave?

I stop and check the coolant level of my liquid-cooled motorcycle

I stop and check the cooling fins of my air-cooled motorcycle

I continue to the next gas station

I stop because continuing to ride can cause engine damage (piston seizure)

12 / 15

Category: Class A -3- Vehicle Technology - Level 3

Why are drum brakes with worn brake pads dangerous?

Because the braking distance increases

Because the brake drum can be destroyed

Because the drum brake tends to lock prematurely

Because the brakes tend to overheat prematurely

13 / 15

Category: Class A -3- Vehicle Technology - Level 3

Under what circumstances must you dip your headlights?

When driving close behind another vehicle

When stopping

When accelerating or braking

With oncoming traffic

14 / 15

Category: Class A -3- Vehicle Technology - Level 3

What consequences can a too tightly tensioned chain on a motorcycle have?

The necessary suspension travel can become too short

The chain can jump off

Wear on the drive increases

The chain can break

15 / 15

Category: Class A -3- Vehicle Technology - Level 3

What causes can an unusual chain noise on a motorcycle have?

The chain is tensioned too loosely

The chain is poorly lubricated

The sprockets are not aligned

The chain is new

Your score is

The average score is 0%

Class A -3- Vehicle Technology – Level 3