Class C -5- Tachograph, Driving Time - Level 2

2 of 4 Levels

1 / 15

Category: Class C -5- Tachograph, Driving Time - Level 2

How can the reading out of the data from the driver card for storage in the company be done?

By inserting the driver card into a card reader in the company, the data is stored there in the IT system

By inserting the driver card in slot 2 of the digital tachograph, the data is always automatically stored correctly

By inserting the driver card in slot 1 and the company card in slot 2 of the digital tachograph, the data is always automatically stored correctly

By inserting the driver card in slot 1 of the digital tachograph, the data is always automatically stored correctly

2 / 15

Category: Class C -5- Tachograph, Driving Time - Level 2

You are driving a truck of vehicle class N2 continuously for 4.5 hours. How long must your driving break then be at minimum?

90 minutes

60 minutes

45 minutes

120 minutes

3 / 15

Category: Class C -5- Tachograph, Driving Time - Level 2

You want to drive a truck with a digital tachograph. Your driver card has become defective or has been lost. How long may you drive without a card?

Maximum 7 days

Maximum 15 days

Not at all

Maximum 28 days

4 / 15

Category: Class C -5- Tachograph, Driving Time - Level 2

In what period must the data be read out from the driver card and stored in the company?

In any case at the end of the daily rest period

At the latest after 28 days on which activities were recorded

At the latest after 90 days on which activities were recorded

In any case at the latest after 28 calendar days

5 / 15

Category: Class C -5- Tachograph, Driving Time - Level 2

Which activities fall under the term "other work"?

When I am available for driving a vehicle but am not driving it myself and am also not performing any other work

When I change a wheel on the vehicle

When I load or unload the vehicle

When I travel as the 2nd person in a moving vehicle in multi-driver operation

6 / 15

Category: Class C -5- Tachograph, Driving Time - Level 2

Which activities fall under the term "availability time"?

Only when I load the vehicle

When I change a wheel on the vehicle

When I am available for driving a vehicle but am not driving it myself and am also not performing any other work

Only when I unload the vehicle

7 / 15

Category: Class C -5- Tachograph, Driving Time - Level 2

What does this symbol on the chart disc of an analog tachograph or on the display of a digital tachograph stand for?

Work breaks or rest time

Availability time

Other work

Driving time

8 / 15

Category: Class C -5- Tachograph, Driving Time - Level 2

What does this symbol on the chart disc of an analog tachograph or on the display of a digital tachograph stand for?

Other work

Availability time

Driving time

Work breaks or rest time

9 / 15

Category: Class C -5- Tachograph, Driving Time - Level 2

You are taking a driving break in your truck of vehicle class N3 with a digital tachograph at a rest area. A special transport escort asks you to drive the truck 15 m further to let a heavy transport pass. How should you behave?

I continue driving only when the required minimum duration of the driving break has been reached. Otherwise I would illegally interrupt the driving break

If the truck was first registered for traffic before 01.10.2011, I continue driving. Then I make a printout from the tachograph and have this signed by the special transport escort so that I do not illegally interrupt the driving break

I continue driving only after I have set the tachograph to the symbol "Other work". Otherwise I would illegally interrupt the driving break

I continue driving if the truck was first registered for traffic from 01.10.2011. Moving the truck for up to 30 seconds does not lead to an illegal interruption of the driving break. The tachograph does not need to be changed

10 / 15

Category: Class C -5- Tachograph, Driving Time - Level 2

You are driving a truck of vehicle class N2 with a digital tachograph. The message "Speed too high" is flashing on the display of the tachograph. How should you behave?

I must acknowledge this event by my signature on the daily printout

I immediately visit the nearest workshop

I drive slower

I acknowledge the message by pressing the "OK" button on the tachograph

11 / 15

Category: Class C -5- Tachograph, Driving Time - Level 2

You are driving two trucks with analog tachograph within one working day. The same chart discs can be used for both trucks. How should you behave?

At the start of work, I make the necessary entries on the front of the chart disc. I enter the license plate of the truck used at that time

When changing vehicles, I enter on the back of the chart disc the reading of the odometer of the truck used from that time on

When changing vehicles, I must enter on the back of the chart disc the place of the vehicle change

When changing vehicles, I enter on the back of the chart disc the time of the vehicle change and the license plate of the truck used from that time on

12 / 15

Category: Class C -5- Tachograph, Driving Time - Level 2

You are driving a truck of vehicle class N2 with a digital tachograph. You have acknowledged the message "Speed too high" with "OK". What does this do?

The warning on the display of the digital tachograph disappears again

The speeding is stored even if the "OK" button is pressed

If the "OK" button is pressed within 60 seconds after the warning lights up, the speeding is not stored

If the "OK" button is pressed within 10 seconds after the warning lights up, this can no longer lead to a penalty

13 / 15

Category: Class C -5- Tachograph, Driving Time - Level 2

How can you determine whether a chart disc is suitable for the analog tachograph of your truck?

The final value of the measurable speed of the chart disc and tachograph must match

The test mark of the tachograph must be listed on the back of the chart disc

The chart disc must come from the same manufacturer as the tachograph

The approval number of the tachograph must be listed on the back of the chart disc

14 / 15

Category: Class C -5- Tachograph, Driving Time - Level 2

What does this symbol on the chart disc of an analog tachograph or on the display of a digital tachograph stand for?

Availability time

Other work

Driving time

Work breaks or rest time

15 / 15

Category: Class C -5- Tachograph, Driving Time - Level 2

You are driving a truck of vehicle class N2 for 4.5 hours. Can the necessary driving break of 45 minutes also be divided?

Yes. Any division is permitted as long as 45 minutes of driving break are taken after 4.5 hours of driving time

Yes. Part 1 must be at least 15 minutes, part 2 at least 30 minutes long

Yes. If part 1 lasted at least 30 minutes, 15 minutes are sufficient for part 2

Your score is

The average score is 0%

Class C -5- Tachograph, Driving Time – Level 2