Class F -4- Loading, Cargo Securing - Level 3

3 of 5 Levels

1 / 15

Category: Class F -4- Loading, Cargo Securing - Level 3

What materials are particularly suitable for filling loading gaps?

Air cushions

Empty pallets

Wooden frames

Stowage bags

2 / 15

Category: Class F -4- Loading, Cargo Securing - Level 3

Forces act on the load during driving. In which direction can the greatest force occur?

The forces are equal in all directions

Sideways

Rearward

Forward

3 / 15

Category: Class F -4- Loading, Cargo Securing - Level 3

Which information on the label of a lashing strap is significant for tie-down lashing?

The pre-tensioning force that can be used in the strap for tie-down lashing STF

The length

The hand force of the user SHF

The maximum load capacity of the lashing strap under straight pull LC

4 / 15

Category: Class F -4- Loading, Cargo Securing - Level 3

Which of the listed forces can act on the load of a trailer during driving?

Acceleration forces

Release forces

Lashing forces

Centrifugal forces

5 / 15

Category: Class F -4- Loading, Cargo Securing - Level 3

You want to calculate the friction force of the load on the loading area of your trailer. What friction coefficient must you expect when a wooden pallet is loaded on a wooden loading surface?

0.5

0.3

0.2

0.4

6 / 15

Category: Class F -4- Loading, Cargo Securing - Level 3

You want to load round timber on a trailer with stanchions. What must you pay attention to?

The load is to be loaded in the center of the vehicle up to 1/4 of the trailer width higher than at the edge, but not higher than the stanchions

I must load from inside to outside to avoid hollow spaces as much as possible

I must load from outside to inside to avoid hollow spaces as much as possible

Heavy logs should be loaded as low as possible

7 / 15

Category: Class F -4- Loading, Cargo Securing - Level 3

How can you increase the friction forces between the loading area and the load?

By stowing the cargo without gaps

By tie-down lashing the load on the vehicle

By placing anti-slip underlays

By cleaning the loading area before loading

8 / 15

Category: Class F -4- Loading, Cargo Securing - Level 3

You want to load round timber on a trailer with stanchions. What must you pay attention to?

The stanchions of the trailer may be extended up to 10% of the base length

The load may be loaded up to 20% higher than the stanchions in the middle of the trailer

The cargo may not be loaded higher than the stanchions

The stanchions of the trailer may not be extended

9 / 15

Category: Class F -4- Loading, Cargo Securing - Level 3

How great is the force against which the load must be secured rearward at minimum?

25% of the load weight

50% of the load weight

80% of the load weight

100% of the load weight

10 / 15

Category: Class F -4- Loading, Cargo Securing - Level 3

How is the friction force of the load on the loading area of a trailer calculated?

The weight force of the load times the friction coefficient between load and loading area

Half the weight force of the load times the friction coefficient between load and loading area

The friction force is always the same as the weight force of the load

Double the weight force of the load times the friction coefficient between load and loading area

11 / 15

Category: Class F -4- Loading, Cargo Securing - Level 3

You want to transport a pallet standing freely on the loading area of your trailer. What force is to be assumed as the necessary securing force for load securing?

50% of the weight force of the load minus the friction force of the load on the loading area

80% of the weight force of the load minus the weight of the load

80% of the weight force of the load minus the friction force of the load on the loading area

80% of the weight force of the load plus the friction force of the load on the loading area

12 / 15

Category: Class F -4- Loading, Cargo Securing - Level 3

You want to calculate the friction force of the load on the loading area of your trailer. What friction coefficient must you expect when a plastic pallet box is loaded on a wooden loading surface?

0.2

0.6

0.5

0.3

13 / 15

Category: Class F -4- Loading, Cargo Securing - Level 3

What forces can act on the load rearward during driving?

The acceleration force during acceleration

An additional force when driving uphill

The braking force during braking

The centrifugal force during cornering and rapid evasive maneuvers

14 / 15

Category: Class F -4- Loading, Cargo Securing - Level 3

What does the size of the friction coefficient between load and loading area basically depend on?

The driving speed

The slip resistance of the loading area

The weight force of the load

The slip resistance of the cargo

15 / 15

Category: Class F -4- Loading, Cargo Securing - Level 3

You want to transport a pallet on the loading area of your trailer that is standing in positive locking against the front wall of the body. What force is to be assumed as the necessary securing force for load securing?

50% of the weight force of the load minus the friction force of the load on the loading area, if the front wall can absorb the force occurring during braking

80% of the weight force of the load minus the weight of the load

50% of the weight force of the load minus the friction force of the load on the loading area, if the front wall cannot absorb the force occurring during braking

80% of the weight force of the load minus the friction force of the load on the loading area, if the front wall cannot absorb the force occurring during braking

Your score is

The average score is 0%

Class F -4- Loading, Cargo Securing – Level 3